Thursday, February 28, 2013

How to build a boat

Introduction:
The purpose of the Water Odyssey project was to design and compel a ride that is powered solely by angiotensin-converting enzyme liter of irrigate system and can travel 2.20 meters in the shortest join of time. The purpose of this report is to explain the physics concepts our group use to design our ride. As in any competition, the Water Odyssey competitor had several rules. The gravy holder could not be any durable than .5 meters and no wider than .3 meters. The boat had to be able to float in .18 meters of weewee. The boat could only be powered by the water reservoir; no opposite energy storing devices or pressurized containers were allowed. The refillable water reservoir had to ride in and be attached to the boat. Finally, the boat had to operate independently of any external inputs.
Discussion:
Our boat was, for the most part, built in one day. We got together and stubborn that Styrofoam would be the best material for the boat. We chose Styrofoam, because it is light, floats easily, and can be sanded so that it is smooth and there is less friction between the boat and the water. We bought a long sheet of Styrofoam and cut it in half. We because draw a bead ond one half on top of the other and used rubber cement to glue them together.

Order your essay at Orderessay and get a 100% original and high-quality custom paper within the required time frame.

We did this, because we wanted the water to sit up above the water level so we could use its potential energy to help power the boat. We thusly cut erupt a slot for the water feeding bottleful to be placed and used wire to secure the bottle in our boat. On our first trial in the bathtub, we piece that the water did not come push through smoothly; it chugged out of the bottle. This made the boat travel very slowly. In guild to let the air escape out of another place than where the water was coming out, we put a small great deal in the bottom of the bottle. This made the water come out a lot smoother and made the boat clear much faster. We chose to not use any tubing in our boat, because the bottle has a natural venturi where the water flows out. After test our boat, we decided that the flat...If you want to get a full essay, put together it on our website: Orderessay



If you want to get a full essay, wisit our page: write my essay .

No comments:

Post a Comment